1-403-253-6400 | E-mail: calgarysigns@gmail.com

CSB Header Logo Signage, Wraps, Banners, Printing

• To see other signs and graphics, we recommend USING THE ABOVE MENU to navigate to other pages (drop-downs show all the types of signs we offer) •

CSB Calgary produces & installs custom signs for office reception

Reception Signage Is An Important Part Of A Company’s Image Strategy Due To The Fact That It Constitutes The First Point Of Contact Between Clients And The Organization It Provides An Elegant Welcome For.

In An Office, The Company’s Name And Logo Sign Is Typically Placed In The Elevator Lobby (Office Towers), And Also In The Foyer, Lobby, Or Reception Area, With The Wall Behind The Reception Desk Being The Primary Location For It.

Glass Is The More Elegant Material For The Back Substrate, But Is Considerably More Pricey Than Plastic (Acrylic, Polycarbonate) Because It Needs To Be Tempered So It Will Shatter In Small Pieces, Like Passenger Windows On A Vehicle, In Case Of An Accident.

Aluminum Composite Material Is Most Widely Used In The Manufacturing Of Quality Office Wall Sign With Three-Dimensional Graphic Elements. The Latter Can Be From Same Material, Plastic (PVC, Coloured Acrylic), Or Foam (With Metallic Veneer Face).

Reception Wall Signs Can Be Installed With Or Without A Gap Aka Offset From The Receiving Surface. Some Designs Have Multi Layered Construction And Stacked Graphic Elements.

Our Designs Incorporate Playful Combinations Of Non-3D Graphic Elements Such As Vinyl Coverings, And Raised Letters, With The End Result Being Simple And Very Affordable (E.G. Total Cost Of A Sign Like In The Above Photo, Including Installation Would Be Between CA $800 And $1200 Depending On Its Size And A Few Other Factors).

For Stone Wall Installations We Charge More Due To The Fact That It Is More Time Consuming To Drill And Level The Sign Properly Since The Rocks Are Uneven. A Money-Saving Tip Is To Contact A Sign Company Like CSB (Calgary Signs & Banners) During The Interior Renovation Planning Stage, So The Construction Company Can Put Dowels Where The Stand-Offs Will Go.

Frosted Acrylic Material For A Sign Backing Board Is A Economical Choice That Does Not Cut Into The Good Looking Of A Sign. We Recommend It Wherever Possible, Especially When The Sign Need To Blend In With Its Surroundings. The Price Of A Product Like The Above Starts At CA $350, Which Is Generally Regarded As Inexpensive In This Category.

We Can Print Adhesive Vinyl With Different Patters And Imitation Wood Grains Which We Later Use To Wrap A Board With, Thus Creating A Fabulous Looking, Long Lasting Sign That Does Not Have To Be As Expensive As If We Were To Purchase An Exotic Essence Wood Slab.

Aluminum Composite Panels Come In A Variety Of Skin Colors Including Chrome, Brushed Silver, Gold Or Copper. With The Many Options Of The Vinyl Graphics Color, It Makes The Color Combinations Endless, Although Many Times “Less Is More”!

1 Inch Aluminum Stand-Offs Are Components Used In Our Standard Wall Sign Installation Process, And We Also Carry Stainless Steel 3 Inch Deep Ones For Uneven Surface Walls.

Hanging Feature Signs For Vendor Stands In Farmers Markets In Calgary Are Some Of The More Specialized Products We Create Through Close Consultations With Our Clients And Precise Site Measuring For Proper Fitting.

When Company’s Require Us Using Specific Pantone Colours For Their Logos, We Can Resort To Either Custom Coating (More Elegant, Costs More), Or Using Colour-Matched Vinyl For Facing The Letter Material (Only) And The Second Option Costs 20-30% Less.

Metal Engraved And Spot-Coated Aluminum Signs Are Very Intricate And Require Considerable Amount Of Time To Make, Thus They Tend To Cost More.

We Can Use Polycarbonate (Plastic Which Is Almost Impossible To Break) For High Quality Plaques For Outdoor Use. However, No Material Is Vandal-Proof, And An Ill-Intended Person Can Easily Permanently Damage A Sign By Scratching It With A Sharp Object, Or With Graffiti.

Individual 3D Letters Mounted Directly Onto The Painted Drywall Wall Is Still The Most Common Way Of Presenting A Company’s Name To Visitors. On The Downside, This Signage Does Not Allow For Reusing Should Relocation Be Required, And The Removal Will Almost Certainly Require Wall Repairs (Be Advised).

We Do One-Off Office Signs Exactly How Our Clients Tell Us That They Would Like Them. We Work With Our Clients When Designing Their Signs. Any Ideas Thrown At Us We Make Them Reality. We Have Developed A Problem-Solvers Reputation Re. Signs.

We Design, Manufacture, And Install A Variety Of Door Nameplates From The Simplest Ones, To Products With More Features Such As Sliders, Glow-In-Dark Finishes, Etc.

CSB Has Produced Many Cubicle Signs And Office Nameplates For Companies In Calgary, And We Provide Full Service I.E. Including Installation At Site Before Moving, Or After The Spaces Are Occupied By People, When We Work Weekend Or After Hours So There Is No Inconvenience For Our Clients.

Many Companies Use Poster Snap Frames Do Display Their Portfolio Work Photos, Certifications, And Other Information Destined To Be Shared With Staff And Visitors. CSB Can Install Poster Frames And Wall Displays Available In Many Sizes, From Letter (11 Inch X 8.5 Inch) Up To XXL (60 Inch X 48 Inch). See Page “Snap Poster Frames” For More Information And Available Sizes And Pricing.

Calgary Signs & Banners will design and manufacture any type of office signs according to customer's preferences. Our design process is a 2-way interactive process, where clients receive proofs (aka mock-ups) for review and they revert with changes or approval to put in production. At CSB clients can get any type of signs found in an office: cubicle signs, name plates, name tags, door signs, reception signs, wayfinding signage, lobby signs, name inserts, engraved signs, lamicoid (lamacoid) tags, 3D logo signs. Clients needing office signs in Calgary, Red Deer, Edmonton, Fort McMurray, Grande Prairie, Lloydminster, Medicine Hat, Lethbridge, Canmore, Banff have peace of mind regarding getting what they expected!.

  • Office Reception Signs 3D Wall Logos And Nameplates Calgary (read more)

    CSB aims to be Calgary's best value choice for custom-made signs and graphics. Our products can be found all across Alberta in Calgary, Airdrie, Cochrane, Okotoks, Bragg Creek, Chestermere, Strathmore, High River, Turner Valley, Nanton, Olds, Sundre, Canmore, Banff. We will offer our clients the highest quality at the lowest price possible.

Pricing Table (Office Reception Wall Signs, most common sizes, yet we can make any custom size)

Buy1Only Buy2* Buy3-5* Buy6>*
32"x24" Type 1 C$350 C$320 C$300 inquire
32"x24" Type 2 C$450 C$420 C$400 inquire
32"x24" Type 3 from C$550** from C$520** from C$500** inquire
48"x32" Type 1 C$630 C$570 C$540 inquire
48"x32" Type 2 C$810 C$750 C$720 inquire
48"x32" Type 3 from C$990** from C$930** from C$900** inquire
* Of The Same
** Based on The Complexity Of The Logo (intricacy of text and shapes, number of colors, character size, etc.)
Type 1 = Brushed Metal Face (Siver, Gold, Bronze) Composite Aluminum Board With Vinyl Graphics (no "3D")
Type 2 = Frosted Plexiglass (Acrylic) Board With Vinyl Graphics (no "3D")
Type 3 = Brushed Metal Face (Siver, Gold, Bronze) Composite Aluminum Board With 3D Letters 1/2 inch (12 mm) deep
(other letter material thickness available - inquire for pricing.
(backing board also available in tempered glass - inquire for pricing.
All of the above are prices are supplied, net, FOB our shop in Calgary, AB. Labour and other costs to be determined if customer wants us to come to install the sign(s). Shipping / delivery costs not included.
Go to top of page